 |
When there is no DoS attack, the packets transmission paths are 1-3-4-5-6-15, 1-3-4-5-6-16 and 1-3-4-5-6-7-18. And the time delay of Substation 1, Substation 2 and Substation 3 are 90ms, 90ms and 95ms.
And then we can configure the parameters through the DCAM panel during the simulation. In the panel, the DoS attack experiment is carried out on Node 5, and we choose one outside Node 19 as the attack node.
The result is shown here. As the attack node sending a large number of meaningless information to the client node——Node 5, it can hardly meet its ideal continuity requirement, so the three substations refuse to move.
|
IEEE/ICACT20220395 Slide.13
[Big Slide]
[YouTube]